Move into a home with a power track and one of the first questions is what you can actually plug into it. The track carries power along the wall, but every appliance reaches it through a small adaptor, and those adaptors are where most of the confusion sits. A power track socket looks simple from the outside, yet the shape of the rail, the plug type and the rating of each adaptor all decide what works. This guide explains each of those in turn, using the specifications we publish for our own tracks and adaptors.
No. A power track socket adaptor is built to fit one brand’s rail, so adaptors are not interchangeable between systems. In Singapore our UK adaptor takes the standard three-pin plug and is rated at 13A and 250V, and one track can run several adaptors as long as the total load stays within the track’s limit. Buy adaptors made for the track you own.
A power track socket is the plug-in point on a power track. Instead of a fixed outlet, you clip an adaptor into a groove that runs along the rail, and that adaptor gives you a socket or charging ports wherever you place it. The rail carries the power and the adaptor is the part your plug touches. Our power track system page shows the full range of rails our adaptors fit.
Every brand designs its own rail profile, contact layout and locking mechanism. An adaptor has to match all three to draw power safely, which is why adaptors from one system are not built to fit another. Our adaptors are made for Nexen tracks. If you are thinking of mixing brands, ask the maker of the adaptor whether it supports your track before you buy, rather than forcing a fit. The same applies when you add to an older installation: match new adaptors to the track brand already on the wall.
The word universal also gets used for travel adaptors that accept plugs from different countries. That is a separate product. The track’s own adaptor is still the part that connects to the rail, so a travel adaptor only ever sits between your appliance and that adaptor.
Singapore uses the Type G three-pin plug under British Standard 1363, as our guide to the most common plug type in Singapore explains. Our UK adaptor takes that same three-pin plug, so any appliance you already use at a wall socket at home fits it without a converter.
Our tracks are certified to BS 5733, the British standard for general electrical accessories, and registered for the Safety Mark. The adaptor is what turns that certified rail into a familiar three-pin power track socket you can plug into.
The Premium UK Adaptor is rated at 13A and 250V, measures 67mm across and 43mm deep, and weighs 82g. It carries a 3-year warranty. It comes in black, and in white with a warm white LED light.
The 13A rating applies to each adaptor, so it covers one plugged-in appliance at a time. The limit that matters more when you add several adaptors is the total load on the whole track, which we cover further down.
For phones, tablets and laptops, the USB Charger (Type A + C 25W) clips into the track the same way and gives you USB-A and USB-C charging without a separate plug. It comes in black and in white.
We also make two smart adaptors. The Smart Adaptor connects to the Smart Life app over 2.4GHz Wi-Fi and can be linked to Google Home or Amazon Alexa, so you can switch it on and off from your phone or by voice, as our smart adaptor setup guide shows. The Smart 65W Adaptor adds USB-A and USB-C charging up to 65W, with each port switchable in the app.
Hold the adaptor with the Nexen logo upright, line its rotary axis up with the middle groove of the track and push it in at the 9 o’clock position, where it is off. Turn it 90 degrees clockwise to 12 o’clock until you hear a click. It is now on and locked in place. To switch it off, turn it back to 9 o’clock until it clicks again.
At 9 o’clock the adaptor slides left or right along the rail, so you can move it without taking it off the track. Between 10 and 11 o’clock it sits in standby: power is cut, but the adaptor stays locked and cannot be pulled out. Our adaptor manual walks through each position with diagrams.
Our product brochure rates each track at 32A and 250V. A 1.5 metre SLIM track safely powers up to 15 devices, as long as total power use stays within 8,000 watts.
The combined wattage matters as much as the number of adaptors. Before you plug several high-power appliances into one track, add up the wattage printed on each appliance’s rating label and keep the total within that 8,000-watt ceiling. Spreading heavy appliances across two tracks is the simpler fix when the total runs close.
A Premium UK Adaptor costs S$59.90, or S$179.70 for a pack of three, and the USB Charger costs S$59.90. For a track you plan to fill gradually, three UK adaptors and one USB charger come to S$239.60.
Because adaptors can be added at any time, you do not have to buy the full set on day one. Our power track price guide shows how adaptor costs add up alongside the track itself and installation.
The adaptor is the part you handle every day, so a few habits keep it in good order. Keep adaptors and the track dry, use them indoors only, and disengage an adaptor from the track when it is not in use, as our adaptor manual advises. When cleaning, avoid harsh chemicals, cleaning solvents and strong detergents.
When you buy adaptors, check that the product carries the SAFETY Mark. In Singapore it must be affixed on controlled goods that have been tested and certified to the relevant safety standards before they can be supplied here.
Start by listing what will plug into the track at the same time. A desk often calls for a mix of UK sockets and USB charging, while a kitchen counter leans towards UK adaptors for small appliances. Our kitchen power track guide suggests one adaptor per appliance you use daily, plus a spare. Buy for what you use today, since adaptors can be added later without changing the track.
If you also need HDMI or Ethernet at a desk or media wall, those connectors are built into our Pro Series track rather than added as adaptors. Decide on that before the track goes up, because it shapes which track you choose rather than which adaptors you buy.
If you would like help planning the layout, WhatsApp us using the button below. Our design consultants will suggest an adaptor mix for your track length and the appliances you plan to run, so every power track socket on the rail has a job to do.
No. Our adaptors carry a 3-year warranty subject to our warranty terms, and damage caused by improper use is not covered. Following the fitting and care steps in the adaptor manual keeps your cover intact.
Use and store adaptors in a dry room between -5°C and 40°C, with an average below 25°C over any 24-hour period. They are for indoor use only and should be kept away from water and dust.
No. When the adaptor is on at 12 o’clock, or in standby between 10 and 11 o’clock, it is locked to the track. Turn it fully back to 9 o’clock first, then lift it out.
No. Once the track is installed, adaptors clip in and twist to lock by hand, so you can add, move or remove them yourself. The track installation is the part we recommend leaving to our electricians.
Click on the link to find out more about our services and products. Chat with our sales representatives today!
WhatsApp Us
Home
About Nexen
Our Products
Luxe Collection
Power E-Bar Collection
Kinetic Switch
