A wall power track is a power rail fixed along a wall, with adaptors that clip on wherever a socket is needed. It suits TV walls, feature walls and the wall above a desk, where devices change over the years and a row of fixed sockets would fill the wall. This guide covers where it fits, surface or recessed fitting, the series and finishes, load and installation, using figures from our own product specifications.
A wall power track runs along a wall and takes clip-on adaptors anywhere on its length, so each device gets a socket right where it sits. Fit it on the surface of a finished wall, or recessed flush into a cut-out during renovation, and plan the total load before adding heavy appliances.
The track is a rail connected to your home wiring at one end terminal, and it carries power along its whole length. On a wall, that means one clean line replaces a cluster of faceplates. Each socket is an adaptor that twists to lock onto the rail, so the layout can follow your furniture.
A TV wall gathers the screen, a soundbar, a router, a games console and a streaming box in one place. A track running along the wall just above the console gives each device its own adaptor, so cables drop straight down behind the furniture. When the console changes, the adaptors move with it along the rail.
A surface track mounts straight onto a finished wall, which suits homes already lived in. Our SLIM surface track is 86mm wide and 19mm deep, and our Pro surface track is 88mm wide and 29mm deep. A recessed track sits flush inside a cut-out, which your carpenter prepares during renovation: 71mm wide and 25mm deep for SLIM, and 71mm wide and 35mm deep for Pro. Our guide to surface vs recessed power tracks compares the two in full.
On a feature wall, the track is part of the design. Our standard colours include Royal White, Midnight Black and Grey, and our Pro track can also be finished in surface laminates to match your carpentry. Match the track colour to the wall, or pick a contrast colour to make the line part of the feature.
For the full range of finishes, our guide to the Nexen eBar covers the Arise, Luxe and Terra-Arise collections.
A wall above a desk or behind a TV often needs data as well as power. Our Pro series can carry HDMI, Ethernet and USB connectors along the rail, offered as Pro Integrations add-ons, so one track serves the screen, the network and the chargers. Our Smart USB Charger clips on like any adaptor and gives you a Type C port and a Type A port for phones and tablets.
For a desk against the wall, our guide on how to organise your study table covers the layout below the track.
Each of our UK adaptors is rated at 13A and takes one appliance, one metre of our track supports up to 11 adaptors, and the total power draw of everything plugged in should stay within 8,000 watts. A TV wall usually sits well within that. For heavier appliances, check your flat’s supply too: our guide to HDB electrical loading explains the 30-amp and 40-amp limits.
When you buy from us, our own electrician and contractor install the track and connect it at the end terminal. Installation is generally S$60 per point, and the exact figure is confirmed after a free site survey. Our power track price guide shows how the track, the adaptors and the installation add up.
Whichever track you choose, check that it carries the Safety Mark, which in Singapore must be affixed on controlled goods that have been tested and certified to the relevant safety standards.
Our power track range shows every series and finish for a wall, and our page on power tracks in Singapore sets the collections side by side. Book a complimentary consultation at our design showroom near Kallang, and bring photos and measurements of the wall you have in mind, so we can plan the layout with you.
Standard lengths take 3 to 5 working days. A laminated Pro track takes 7 to 10 working days, so order it early in your renovation, while the carpenter is still building the wall.
Yes. The adaptors slide along the rail and twist to lock, so when the TV or console moves along the wall, you move the adaptors by hand to the new spot on the same track.
Our Pro track runs up to 3 metres in one length, which covers most TV walls and desks. For any other length, contact us directly and our consultants will advise on the best layout for your wall.
Yes. Your own interior designer or contractor can install it, as long as it is installed properly. We provide the measurements and specifications for surface and recessed tracks so they can plan the wall correctly.
Click on the link to find out more about our services and products. Chat with our sales representatives today!
WhatsApp Us
Home
About Nexen
Our Products
Luxe Collection
Power E-Bar Collection
Kinetic Switch
